$5,250 to $8,750
(350 sq.ft. wainscoting installed)
Get free estimates from carpenters in your city.
The beadboard vs wainscoting discussion involves two types of wall paneling that serve the same purposes – to protect the wall from damage, or to cover damage, while giving the room a touch of visual elegance.
Both cover roughly 1/3 to 1/2 of the wall and are usually constructed from wood, though cheaper materials like vinyl and MDF particle board are employed in some products.
The difference between wainscoting and beadboard is style.
Wainscoting looks like wooden panels with raised or recessed squares finished with a chair rail cap.
Beadboard, while typically constructed in panels, looks like narrow vertical strips of wood with a raised edge – the bead – between them. Beadboard is also often capped with a chair rail.
Beadboard, also known commonly as tongue and groove, is made up of wooden planks that are lined up vertically on a wall or a ceiling. Individual planks can be used, or a single sheet can be milled to look like individual planks.
Beadboard gets its name from the ridge – the bead – between each of the boards. This wall covering usually goes up 30 to 54 inches up a wall, but can be found in heights up to eight feet long. There are many different kinds of wood that are used for beadboard projects, with pine and cedar being the most common. Other types of wood that are used are Douglas fir, walnut, oak, maple and cherry. MDF and vinyl beadboard are cheaper options.
Wainscoting is solid wood, plywood or PVC paneling that is installed on the lower third of walls inside a home. This wall covering is aesthetically pleasing and gives the room character. Wainscoting is mostly found in foyers, dining rooms, living rooms and master suites, but there’s no reason you can’t use it in any room in your home.
The complexity of wainscoting varies from simple flat panels to more intricate designs, such as overlay panels and board and batten. There are also panels of wainscoting that look like beadboard. The average height of wainscoting is between 30 and 54 inches high, depending on the height of the home’s ceilings. Wainscoting can also go up the entire wall in rooms, such as entryways or mudrooms.
Listed below are the most common types of wainscoting that was introduced above, starting with least expensive:
Installing beadboard or wainscoting on an interior wall is a moderately challenging project for a skilled homeowner, though it is much more difficult to install on a ceiling. The reason that the ceiling installation of beadboard is tougher is due to the high work conditions, which causes many safety concerns. It is recommended that beadboard on a ceiling should be installed by an experienced, licensed contractor.
Putting beadboard on interior walls is easier, but comes with challenges, too. Installing it around doorways, windows, corners, and outlets requires more measuring, layout and cutting skill. The necessary tools needed for installing beadboard are a hammer or nail gun, wood glue, circular or miter saw, jigsaw, and a level.
Tip: Bring your material, beadboard or wainscoting, into your home 3-4 days before installation to let it acclimate to the indoor climate. When it is the same temperature and has the same level of humidity as the air in your home, it is less likely to warp, crack or separate after installation.
Tip: Consider priming/painting or staining the material before it is installed on the wall. The process is easier to control when the panels are horizontal, and this avoids having to tape off the walls.
Beadboard has a wider range of installed costs than wainscoting – $10 per square foot for cheap materials and up to $30 per square foot for premium wood beadboard.
The cost to install beadboard on an interior wall or ceiling depends on the material. Cheap wood beadboard that will be painted costs around $2 – $5 per square foot. When you choose higher-grade material to stain or finish clear, like oak ($$), maple ($$) or cherry ($$$), cost rises to $8 to $20+ per square foot.
A contractor generally will charge between $3 and $5 per square foot for the installation. Staining or painting beadboard adds about $5 more per square foot to the project cost, so the total cost to put beadboard in your home will be between $10 and $30 per square foot as stated in our headline price range at the top of this page.
Wainscoting runs $15-$25 installed per square foot based on material used and the design of the panels.
Price factors are similar to those with beadboard – and the material used in the wainscoting is the biggest factor. This price includes the material and the installation costs.
Better grades of beadboard and wainscoting are made out of wood, so they require paint or staining at regular intervals over their lifespan. Paint or stain that is properly sealed protects beadboard and wainscoting from moisture and stains. If the wainscoting is constructed from PCV, then there is no need to worry about mold or rotting, but PVC can be brittle and can break or crack. And it doesn’t have the beauty of genuine wood.
Properly cared-for wood beadboard and wainscoting can last “forever” depending on how much wear and tear it experiences in the form of dents, gouges and scrapes. It is often replaced after 30 to 50+ years.
Wood is sustainable and renewable, so wood wainscoting and beadboard are considered “green” or environmentally friendly. PVC (polyvinyl chloride) options are not green, since toxic chemicals are released during the manufacturing process. Their production has a negative environmental impact.
Beadboard and wainscoting are effectively used in all types of climates throughout the United States.
However, indoor climate has an impact on wood materials.
In humid regions like the southeast US, central air conditioning helps control humidity that might otherwise discolor wood or cause warping and gapping.
Where winters are cold, a humidifier in the home will provide essential moisture that can prevent wood from cracking or glue from drying out and causing a separation in materials.
What’s your style? How about the “flavor” of your home’s design?
Wainscoting panels give the room a classic, traditional look. And there are more styles produced than you’ll find with beadboard.
Beadboard is considered by some to have a more contemporary feel.
We recommend using genuine wood material, since some PVC has a shiny, plastic appearance that doesn’t deliver the elegant appearance you want from wainscoting and beadboard.